Can't remove my back light to change my bulb.

[jackabrehart]

My back light isn't working on my Maruader GZ 125, I have been trying to take out the light but I can't get it out I removed 2 screws the light comes out about 2cm but there is somthink stopping it form coming out still. Anyone know what i have to do?

Thanks.

[Motorcycle Forum]

[Easy Rider]

Anyone know what i have to do?

On most bikes, you do NOT remove the bulb socket but instead remove the colored plastic lens.......which exposes the bulb quite nicely.
The lens is usually held on with two small, long skinny screws.
If that's the case with yours, just be careful NOT to overtighten when putting the screws back in.
The lens is fairly easy to crack.

[jackabrehart]

There isn't any screws on the lens the only screws i can find that are holding it in are in the back of it. :/

[QZephyr]

Look under the lense mount to see if you have one screw holding it. On our M's that's what you remove and then turn the lense and pull out.

[Ironjoey]

If it's like my vz800, there's one more screw at the very top...

sent from my motorola triumph using tapatalk

[DrBob]

The microfiche looks pretty simple- remove the screw(s) and then pull it free, twisting the socket to free it from the lense once ou can get your hand in there.

CLICK TO ENLARGE

[QZephyr]

I guess I read this wrong, I was suggesting the signals not the tail light. My mistake.

[jackabrehart]

I have done this now tricky to get to but I managed it lol thanks for the help guys.