Motorcycle Forum banner

Reaction score
0

Marketplace Rating
(0.0 - 0 reviews)

Profile posts Latest activity Discussions Buy & Sell Reviews About

  • · Registered
    Joined
    ·
    1,060 Posts
    Hey BC,

    No thanks on the pegs - I already have my stock set as backup. However, I would like the Haynes manual. I have the PDF from the forum link, but an in-your-hands manual would be nice.

    If you do send it, let me know the shipping costs. I figure it will be a bit more than the springs.

    Rex

    · Registered
    Joined
    ·
    1,060 Posts
    Hi BC/CS,

    I'd be happy to take those springs off your hands. My clutch is fine so far, but I like having small replacement parts on hand for all sorts of things. Let me know what you want for them and then we can seal the deal.

    Rex Waters
    7307 12th Ave SW
    Seattle, WA 98106

    btw - thanks for the appreciative nod when you were asked about the pipes in the thread regarding the vid you posted of the cam chain noise - it didn't go unnoticed

    · Registered
    Joined
    ·
    188 Posts
    The swing arm side has plenty of room i would say 1" 1/4 to 1" 1/2 to the brake linkage, the driveshaft side has about 1/4 to 3/8. It might take a 205 but it would be close.

    · Registered
    Joined
    ·
    188 Posts
    hey burnchassis
    i think i saw somewhere that you have a 150 80 16 on the front of your m. just wondering how you like it? i put a darkside 195 65 15 on the rear and shortly i will have to replace the front tire and was just wanting to know your thoughts.

    · Registered
    Joined
    ·
    1,060 Posts
    Hi burnchassis,

    Quantumcat here. I wanted to confirm with you about the drop-tubes that you requested. I have the stock drop tubes already off the bike and I could get those packed up to provide a shipping quote. I wasn't sure if you were also wanting the drop-tubes from the pipes that I'll be taking off soon. If you're interested in both sets, I can wait until I get the current pipes off and ship both sets at once or I could ship the stock ones immediately and ship the Black Hawks later.

    If you're only interested in one or the other, let me know. Stock can ship immediately. The Road Burner Black Hawks will have to wait a few weeks while my arm heals.

    Let me know your thoughts.

    Rex (Quantumcat)

    · Registered
    Joined
    ·
    1 Posts
    New to site and motorcycles. I posted a thread in mechanics corner. anyway you can look at it and give me a hand.

    · Registered
    Joined
    ·
    11 Posts
    burnchassis,
    I'm new to the forum. I saw that you are in Cincinnati and have a wealth of knowledge on Boulevards. Let me say "Thanks" for the info. you share with the rest of us. I just picked up an '08 with 5,000 miles (black and yellow). I'm in Milford (45150), by the way. Thanks again.
    Aaron White

    · Registered
    Joined
    ·
    1,013 Posts
    hey curt, how's winter treatin ya?? once this snow melts i expect to see some new 1/4 mile times from ya, i need to know what i have to beat for when i go out! ;)

    · Registered
    Joined
    ·
    0 Posts
    I ran across your youtube video and then here in this forum. I have a 2006 C50 and was wondering where you got your pipes from. I want a set of "turn down" pipes but do not know which ones to get. I like the look and sound of yours. Pretty awesome. Any help would be appreciated.

    Sepy
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top