Have you installed the bullet fairing on your m50? What headlight did you go with?
After a year of starts and stops, I finally got serious about mounting my bullet on my M 50. The biggest issue with this install is deciding on how to mount it. If you are a decent fabricator you can make mounting brackets using easy to find flat metal rods (I got mine at Lowes) and a torch to heat it and bend it into shape. You would then you can mount the whole thing using the 10mm screw holes that are underneath the top and bottom triple trees. I not that kind of guy so I came up with an easier, for me anyway. I mixed and matched the Memphis Shades fork mount brackets and I used the quick release fairing mounts.
Pretty slick Stan. Good work!!!
If you can't dazzle 'em with brilliance,Baffle 'em with Bulls!!t!
Roadburner Street Pro's on my M http://www.youtube.com/watch?v=Hf0IYPcoiVc
StanO, please could you tell what kind/model of fairing is it on your post? I Really wanna install one of these on my M50.
In his earlier post he said already that it was the Memphis Shades Bullet 2330-0077.
The 2 Stans in the thread are the same guy.
Im hoping someone can help me out here. Im new to this thread (and the Suzuki m50 for that matter, had less than a year). Im wanting to mount a windshield on my 2009 M50. I found one I like but the fitting list doesn't state my motorcycle. Will this still fit or will I need to mod it? The description says it will fit the following:
2006-2014 Suzuki Boulevard M109R
2014-2016 Suzuki Boulevard M109R Boss
2011-2014 Suzuki Boulevard M109R Limited Edition
2008-2009 Suzuki Boulevard M109R2
2007-2009 Suzuki Boulevard M109RZ Limited
2013-2016 Suzuki Boulevard M50
2013-2016 Suzuki Boulevard M90
2009 Suzuki Boulevard M90
If I posted this in the wrong forum I'm sorry. I appreciate any help
The location of your post is OK but it would have been better to start your own thread.
Have you contacted the company that makes the shield yet ?
Often they can tell you what is required for models not listed.
Don't believe everything that you think.
Ill start a new threat now.
I did contact them, however its through ebay and getting a response isn't always easy
I found a solution how to add this windshield without any modyfications to Suzuki M800 or similar Boulevard M50 with standard oval headlight (i think max to 2009. I asked at "Memphis" company about any other windshield which headlight hole is abaout 21 cm (8,2 inch). And guess what - there is one. Model named MEM7121. I bought it without lock mount kit. I made it myself (pic no. 2). First i put MEM on the headlight and test how to works at specyfic speed. I'm 181 cm (6 feet) tall and at this combination the wind on my head was too strong. So I modyficate the mount lock and put the windshield few cm forward. Situation was the same (maby little better). Next step was change the angle of mount. I just rised the top of windshield. That was it.
PS.: I be able to post images when my post count will by 3, so pictures in next post
I think that I am useful to someone
To above topic, you don't need to change the headlight. Mount kit, which i made with aluminuim pipes (half inch diameter), is mount under steering head shelf (i dont know in english how it names) with 8mm screws.
I went with a 7 in. round headlight and used the factory mounts.
Last edited by StanO; 08-08-2019 at 12:35 PM.