Ok so first post so bare with me...... I have a 2001 HD Sporty 883 and I ordered some turn signals for it. I got the blinkers in and was excited to get them on, so I wired them up in the front, whent thru my checks to make sure everything works and I was good to go. Thenn I put the back on and before i soldered the wires i checked everything out and when I hit the button, the turn signales lit up but didnt blink. so after some cursing and throwing some wrenches i tried putting the stock blinkers back on in the rear and it blinks again. So I left the stock ones on the back and went for a ride. When I started the bike and took off down the street I put the blinker on and it came on but didnt blink. Im stumped. SO to sum it up, I have aftermarket NON led lights in the front, stock lights in the rear and when the bike is not started the blinkers work but when I start the bike and hit the button the blinker comes on but doesnt flash. HELP PLEASE.