Blinkers

1173 Views 2 Replies 3 Participants Last post by Dizzle, Aug 8, 2005

wheeldawg8

Discussion Starter · Jun 26, 2004

I have an '04 SV650S and I removed the rear fender and want to use my tail lights as my blinkers. The taillight is an LED and the blinkers were/are the standard "electrical" blinkers. Instead of spending the $$ on an integrator, I bought 2 trailor wiring harnesses, 1 for Vehicles w/ Common Bulbs and the other is a convertor. I understand the order to splicing the wires, but for blinker wires there are 2 wires going into the blinker itself. How do I know whickone I splice into? Your help is much appreciated.

Save

1 - 1 of 3 Posts

Dizzle

· #3 · Aug 8, 2005

wheeldawg8 said:
I have an '04 SV650S and I removed the rear fender and want to use my tail lights as my blinkers. The taillight is an LED and the blinkers were/are the standard "electrical" blinkers. Instead of spending the $$ on an integrator, I bought 2 trailor wiring harnesses, 1 for Vehicles w/ Common Bulbs and the other is a convertor. I understand the order to splicing the wires, but for blinker wires there are 2 wires going into the blinker itself. How do I know whickone I splice into? Your help is much appreciated.

I'd say get a test light, turn a blinker on and prod the lines if I'm thinking correctly only one of the wires should light up the test light and there ya have it. I may have to try that myself I want to do the same thing after I track down a clear lens for the tail light. Let me know what you come up with, maybe we could collaborate ideas. good luck!

Save

1 - 1 of 3 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month