Motorcycle Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
So, today I decided I wanted to take a bike ride by the beach! However, when I tried starting my bike, the choke would not engage!
So here is what I did...
I added gas..
Pulled the choke about 1/3 of the way
Started the bike with fuel valve set to 'on'
Bike turned over..but stopped shortly after due to the cold engine..
I then set the fuel valve to 'PRI' thinking maybe my carburator bowls are not full..
After leaving the fuel valve on 'pri' for a few seconds, I set it back to the 'on' position.
I then started my bike..STILL the choke is not engaging!

Any ideas???????????
 
1 - 2 of 2 Posts
Top