[bentfork]

I just picked up a used rm125 dirt bike. It has been painted over and has no markings that I can find. Can anyone tell me how to figure out what the year is? The motor is off the bike and cylinder head is off of motor. Are there numbers stamped on the chasis or motor that could solve my mystery. Any help is greatly appreciated.

 

[Knoc]

There are Serial numbers on the block of the motor. if your sitting on the bike, there on your right side, by your inner shin. Then give the dealership a call and they should be able to tell ya what year. (Of the motor at least) Hoep this helps ya out a little bit

 

[woodydat]

does it have USD forks or just conventianal forks?
if it has USD forks its a 97 model or newer.
but yeh do what knoc has said that sounds pretty good. :lol:

 

[92 RM 125]

can we have a picture of the bike? if i see a picture, i can give you a year range of the bike at least. there should be a serial # on the frame up where the forks connect. hope that helps.

 

[bentfork]

I don't have pics right now but I have the serial # from the triple tree.
It is RM125-95987

Anyone translate this or is it a usesless #. Also the bottom end, head and psiston are all off this machine. I can't see any #s on the block. Are the numbers supposed to be on the head?
Thanks

 

[Knoc]

Mine doesnt hav them on the jug, but on the block theres a little pad with the serial number on it. Id call a suzuki delership with your numbers and they should be able to tell ya the year.

 

[bentfork]

This sucks. The motor was painted silver. The pad where I think the serial number was supposed to be is blank. All I have is the numbers stamped on the triple tree. I will take a picture of the frame and see if anyone can figure it out from the type of forks, swing arm, shock cylinders or anything like that.

 

[woodydat]

my guess is it is a 95- 98 model 8)

 

[Knoc]

My guess its stolen..lol.. Seriously.. The pad that is smooth, used to have your serial number STAMPED into it. Also the new paint sounds kinda fishy to me. So anyway, gettin some pics and posting them on here or bringing it to a dealership is probably the best way your gonna figure what year it is.

 

[bentfork]

Try these?

 

[Knoc]

I would say early 80's. My guess is a '82

 

[Hardware]

When you wrote "used" you weren't kidding!

Hope you didn't chuck too much for it...

 

[bentfork]

I got it for free in a package deal of three bikes . I strip and resell parts mostly from street bikes. Got this one with two damaged crotch rockets. I found a stamping on the underside of the gas tank that says 1979. Think that could be it :?:

 

[Knoc]

Yeah, thats sounds about right..

 

[bentfork]

Great. Now I can measure the cylinder and order me a new piston. Then I can see how fast I can go without breakin my neck. Thanks for all the help folks. :wink:

 

[Knoc]

keep us posted! Good luck!

 

[woodydat]

HAHA i have the EXACT same fuel tank as that on my TS 8)

 

[bentfork]

Well the piston that came out of this block has 432p8 stamped on it. That translates to a 1977-1980 rm125. So i guess we have solved the mystery.

 

[crazyman]

I found the year of my bike from a Clymer repair manual, cross referencing the #'s {From fork area & motor} with the charts in the book. I found the book at the local library and after I was sure of the year, I bought my own off ebay (half.com).
Later,
-CM-

 

[OC_RM250]

i have the same problem. i bought my bike used also and the bike frame was powered coated. the engine was sand blasted and the plastic are different. I was told it was a 87 by the dealer, butt than the dealer told me it was an 88...... some parts are compatiable butt not all... so i need to know because i bought 87 clutch parts.....can some one help me?