Motorcycle Forum banner
1 - 10 of 10 Posts

· Registered
Joined
·
17 Posts
Discussion Starter · #1 ·
On my 04 jixxer 1000, i installed a devil exhaust, I followed all the instructions sent by the dealer. Removed the wire that was supposed to send error messages to the display that there is a fuel injector problem. But I am still getting the "Fl" and the RED LIGHT on display screen.

Please help.

Thanks :mrgreen:
 

· Premium Member
Joined
·
14,233 Posts
Are you SURE that you removed the right wire? The wiring diagrams for the Gixxers are pretty complex, and there are LOTS of wires and connectors that look similar.
 

· Registered
Joined
·
3,027 Posts
Odd, I installed a Yosh slip on on my 02 1000 and there was no need to disconnect any wiring? Things must have changed a lot in 2 years. :-|
 

· Registered
Joined
·
17 Posts
Discussion Starter · #4 · (Edited)
I guess so. The instructions says that there is a "black wire w/brown tracer located in the upper corner of the plyg off the cpu on the right (pipe side) of the bike". That is the wire that sends messages that there is a problem w/ the fuel injectors. :mrgreen:

On the 03-04 there is a cable that is connected to the mid-pipe and goes to a servo on the frame. :mrgreen:
 

· Registered
Joined
·
1,933 Posts
Is just me or do all riders in yellow get tagged with the Mighty Morphin Power Ranger name of Trini?? I mean slap a yellow helmet, yellow jacket and possibly yellow gloves on anyone and BAM!!! Your now part of the Trini family??


I thought this kind of cruelty and name calling stopped in 3rd grade. :(
 

· Registered
Joined
·
3,027 Posts
Yep, All that yellow attracts bees too! So keep ridin fast! :mrgreen:
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top