[Guest]

hi everyone--happy holidays and safe riding---i own and older busa (01) and im wondering if there is anything i can do to get her to be even faster than she is---all i did was put after market pipes on her--she tops out @about 230mph--is this it or can she do 250+ with the right work--thanks for help--



98 gsxr 600--drop bike
01 gsxr 1000
01 hayabusa-1300 :shock:

 

[mustangX913]

to get her to be even faster than she is---all i did was put after market pipes on her--she tops out @about 230mph

so your saying with only different pipes as the mod you get 368kph and that you also wish to nail 250mph. well simply your a tosser!
As a member of the 200mph club i cannot ever say i have read or seen a bussa cracking 230mph with just a pipe change.
When you come back to reality i can help you mod the bussa but till then let your hand enjoy.

 

[Guest]

thanks

thanks for your reply--is there someone with any experience that can help me--- --this is a real question--not for a newbee--thanks for your concern. im in reality--this is the fastest production bike made---all stock there pushing 200mph---my gsxr fully stock does 190mph---

anyone with 1st hand experience with the busa write back---

 

[mustangX913]

Re: thanks

thanks for your reply--is there someone with any experience that can help me--- --this is a real question--not for a newbee--thanks for your concern. im in reality--this is the fastest production bike made---all stock there pushing 200mph---my gsxr fully stock does 190mph---

anyone with 1st hand experience with the busa write back---

yer your right aye i've got no experience, i must be talking shyte and full of rubbish well heres the facts as they stand. Fastest busa '99 slowest '02, the '99 busa unresticted managed 320kph just and that was the only standard busa to do so. now when u turbo or nos a busa well thats another story all together. Currently the fastest Hayabusa does 250mph and shyte man your not far of that aye and shall we consider the turbo, ice intercooler and 5 gallen water tank that biatch is running compared to your different pipes.
so as far as not knowing what i'm on about maybe we should go for a walkies out to the garage and take a look at the busa i have with 9psi added.
So if anyone knows i would take a pot shot and say i do!
when you get your hand of it and come back to reality visit this site http://www.200mph.net/yabbse/index.php its a reality based site for fast bikes where currently having a good larf on there at your expence. There you will see exactly what it takes to break 200mph and its slightly alot more than pipes :lol:

 

[Guest]

thanks for all that non important info---i just wanted to know what i can do to make my busa faster--it seems all you want to do is argue--and show that you know best--why dont you post an e-mail address and i'll send you a video of me and my busa doing 230mph---

ps i never said all the bike had done was pipes. all i said was I just added pipes. im the second owner. :roll: send me the email address !!


now is there anyone here that can help with the question i originally asked - thank you

 

[mustangX913]

ok the only way is turbo even though the busa can handle nos easily its still not advisable visit that forum i posted b4 there you will get specialised help on getting your bussa over 200mph. The 200mph club is Hayabussa's and ZX12's (being the slower bike :lol: ) even though its a pommy forum the ppl there meet fortnightly to break 200mph so you will easily be able to pick through what they do and do it to your bike so you might possibly break 200mph.

to the other point no i dont wish to argue i just find it impossible to believe that you can do 230mph. But then if you have obviously you have time cards from a 2mile run so scan it and post it for us!

 

[Guest]

thanks for the info---what is a time card from a two mile run--i have no such thing---all i have is some video of us doing tricks and i have a gas tank mounted video camera of me doing 230mph. i will be so glad to send it to you. as you find it so hard to belive.

 

[The Chad]

heck I'd like to see that, even thought top speed in a stright line takes very little skill. I'm one of those guys that you see in the corner where my highest point might be 2 feet above the ground. I like man and machine not just man on machine. Depending on where you live, you might not have the easy access to tight corners that I do. Not trying to insult or offend anyone, just putting another opinion up.


Anyone can use this,
[email protected]

 

[saleemas]

Hey Chad! Waz up?

Could it be possible that the previous owner changed sprockets and the speedo is off? Notice the olive branch you two...


dont own a busa
dont do 200mph
just following a really funny thread!

 

[The Chad]

Could it be possible that the previous owner changed sprockets and the speedo is off?


Blam, that's exactly what I had in mind, I've seen a video of a guy on a busa reading 230 satrted out in a wheelie then continued on. It showed him doing about 180mph in a wheelie, I love doing high speed wheelies but the rate of acceleration was to fast for onlw one wheel, and I'm talking from first hand.

 

[saleemas]

Yup. That said I'm going to the movies. nyone seen the King returns yet?

 

[mustangX913]

Could it be possible that the previous owner changed sprockets and the speedo is off?

yer i did think the same, but then the Hayabussa is notorious for an inacurate speedo at the best of times anything up to 40kph+ out.

Notice the olive branch you two...

yer my comments do always tend to bring out the best, but are'nt normally ment with mallace.

 

[dognosh]

bigbenz : merry xmas

i'm from www.200mph.org.uk

no piss taking here,tis the season and all

from our club running on runways and reading other forums:
(real speed)
stock busa up to low mid 190's
piped,we have 2 or 3 who managed 200,most on mid 190's
turbo,anywhere from 200 upwards,depends on bhp

the motorhead has done 250 as have one or two others,BUT THATS IT !
and i think they were running on salt
(some have done 230's and 240's on tarmac)
and they spent 1000's
and money is NOT the only thing you need
you need someone who can build HAYABUSA engines !
not just good at engine building

hope this helps?

 

[Dwayne Hicks]

Yup. That said I'm going to the movies. nyone seen the King returns yet?

Tried yesterday - there were only three seats left in the front row of the cinema.. :roll: So we're gonna go on Friday..

Cheers
Dwayne

 

[THEMOTORHEAD]

I HAVE GONE 247 ON GPS
240 ON PAVEMENT(NO GOOD ROADS HERE)
I OWN THE RECORD FOR THE FASTEST 2 WAY RUN WITH AN AVGERAGE SPEED OF OVER 245 MPH OVER A TIMED MILE
DONE AT THE BONNEVILLE SALT FLATS
YOU'LL NEED ATLEAST 380 HP I WOULD SAY MORE LIKE 400 ROAD HP FOR A LITTLE OVER 250
THE BIKE I BUILT AND RODE MADE 570 HP BUT WAS SET UP AT A LITTLE OVER 400 HP TO OBTAIN THOSE SPEEDS

 

[hank]

I happen to own the bike motorhead is talking about. I went 238 with it the meet before he went 247.230 by just changing a pipe?? Take less meds.First off,If you don't change gears,It won't spin enough rpm's to go near that speed,not to mention(as Dennis did) the horsepower you would need.See?? you got a few bites

 

[saleemas]

MH did you build in UK or US? what kind of rubber used for salt? What are other differences to set up for salt run?
G

 

[flying dutchman]

I HAVE GONE 247 ON GPS
240 ON PAVEMENT(NO GOOD ROADS HERE)
I OWN THE RECORD FOR THE FASTEST 2 WAY RUN WITH AN AVGERAGE SPEED OF OVER 245 MPH OVER A TIMED MILE
DONE AT THE BONNEVILLE SALT FLATS
YOU'LL NEED ATLEAST 380 HP I WOULD SAY MORE LIKE 400 ROAD HP FOR A LITTLE OVER 250
THE BIKE I BUILT AND RODE MADE 570 HP BUT WAS SET UP AT A LITTLE OVER 400 HP TO OBTAIN THOSE SPEEDS

Hello can you tell me with what turbo you drive and how many m/m it is. I now a kkk have 62 m/m and a mitshubisi T19 have 47m/m. Thank you

 

[Ninja Eater]

to get her to be even faster than she is---all i did was put after market pipes on her--she tops out @about 230mph

so your saying with only different pipes as the mod you get 368kph and that you also wish to nail 250mph. well simply your a tosser!
As a member of the 200mph club i cannot ever say i have read or seen a bussa cracking 230mph with just a pipe change.
When you come back to reality i can help you mod the bussa but till then let your hand enjoy.

When you come back to reality let us all know. Getting to 207mph (gps) was not easy. My bike is set up with a Turbo pushing 310hp now and will reach about 215mph with gearing i have set, although i do not clam to be over what i have postes at 207mph. (on GPS) Man i need a set of those pipes!!

 

[flying dutchman]

to get her to be even faster than she is---all i did was put after market pipes on her--she tops out @about 230mph

so your saying with only different pipes as the mod you get 368kph and that you also wish to nail 250mph. well simply your a tosser!
As a member of the 200mph club i cannot ever say i have read or seen a bussa cracking 230mph with just a pipe change.
When you come back to reality i can help you mod the bussa but till then let your hand enjoy.

When you come back to reality let us all know. Getting to 207mph (gps) was not easy. My bike is set up with a Turbo pushing 310hp now and will reach about 215mph with gearing i have set, although i do not clam to be over what i have postes at 207mph. (on GPS) Man i need a set of those


What kind of gearing you have