Motorcycle Forum banner

S50 - Fiamm horn mounting?

1572 Views 9 Replies 8 Participants Last post by  DrBob
The S50 horn is, well, .. from a Japanese motorcycle. It doesn't blow, it sucks.

Easy fix, go to Pepboys and get a Fiamm. Worked wonders on my Honda (mmm, dual horn now), and it looks like it'll be east to get to the existing S50 horn. Then the hard part: the bolt stem on the Fiamm just isn't long enough to get through the grommet where the stock S50 horn goes.

Anyone have any success getting an alternative horn mounted? Any vibration issues by using the bracket that Fiamm gives, and a different bolt that is long enough to attach the Fiamm bracket to the Suzuki rubber grommeted bracket?
1 - 1 of 10 Posts
On the Volusia/C50s there is enough room under the right side painted cover to mount 2 Freeway Blaster horns and a relay to fire them. Not sure if it will work on the S50 but I think it will work for the M50s.
Here is a doc that I made for doing it..... louder horns.pdf

My vol now sounds like a truck rather than a road runner beep-beep
1 - 1 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.