Motorcycle Forum banner

Ts 250 Clutch Problem

5515 Views 2 Replies 2 Participants Last post by  Ts250Rider
ive just recently starting having problems with my bike is a 1972 Ts 250, i was pushing it down the street on the way to my local riding spot and as i was walking down the street i pulled in my clutch and it got i pulled it in and it jammed i walked home and took the side panel off my bike where the clutch is and and pulled the lever in and out a few times and it i screwed it back on and it worked....and the clutch cable is verry i thought that must be i pushed it to my local spot and rode it for a bout 20 mins no problems and then when i stoped for a rest...the clutch wouldnt u have to pull it in and then push the lever like 500 times before it works again and its pissin me of...i have no money and im saving up for a manual which i wont get till afer any help will be accepted... :)
1 - 1 of 3 Posts
You probally tightned your springs too tight. they need aobut 8-10 psi, also could be that your cable needs relacin' or.... Pull the cable out and run some WD-40 through it and jack it away 10 or 5 minutes and get all the rust and shicaca out of it.... Maybe you put it together wrong. and there go to "oem parts" and look up your mihkro-Fijsh
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.