Upgraded the front sprocket

1586 Views 6 Replies 6 Participants Last post by Matt C, Mar 28, 2005

Matt C

Discussion Starter · Mar 26, 2005

I installed a 16T front sprocket in place of the stock 15T on my 03 Marauder...13 bucks plus shipping through Dennis Kirk. It was a very easy swap that took less than a half hour. It made the engine RPM's noticeably lower at 50mph and didn't seem to take anything away down low. At higher speeds, 65mph and above it still feels like the RPM's could be lower.
I'm going to order the 17T sprocket and see how it rides then. I think with the V&H exhaust system, K&N's and jet kit I have on it already, the bike should perform well with the 17T sprocket.

Save

1 - 1 of 7 Posts

axel_2078

· #3 · Mar 27, 2005

I'm anxious to know how this works out too. I've been thinking about it myself, but don't know whether I want to do it yet.

Save

1 - 1 of 7 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.

Top Contributors this Month