Motorcycle Forum banner

Latest activity

  • Okidoki replied to the thread xs850 triple help.
    Thanks, I'll give it a try and let you know.
  • Easy Rider replied to the thread xs850 triple help.
    YOu can test the stator output without removing it. Assuming it used the "standard" design, unplug the connector going to the stator...
  • hogcowboy replied to the thread new member.
    WELCOME ABOARD the site, and...
  • Okidoki replied to the thread xs850 triple help.
    Thanks for the advice... I did check for ground short, was fine... It's very hard to find parts for these 850's Thanks
  • Aussie Steve replied to the thread new member.
    Welcome aboard from WA...Au.
  • Aussie Steve replied to the thread xs850 triple help.
    Hard to say where you could get one. Maybe the wiring harness to the stator is shorted?....long shot I know. I guess you know now why...
  • Okidoki posted the thread xs850 triple help in Yamaha.
    Hi, Bought a 1980 xs850 triple a while back and just had some time to work on it, got it running pretty good... Then I noticed the plug...
  • Hi everyone !!!! I live in Michigan and love to tinker with all kinds of motorcycles, and of course ask alot of questions :-) Thanks...
  • myomass2000 updated their status.
    I was repairing my turn signals and crossed a couple of wires. My headlight, Tail Light, speedo light and running lights stopped...
  • myomass2000 updated their status.
    I own a 2002 V Star 1100. I've been riding and wrenching for over 50 yrs. I have found older thred's that pertain to the issue I'm...
  • NO. LOOK to see where the oil is coming from. This could be as simple as having the oil grossly overfilled or not tightening the filler...
  • Dewy reacted to Aussie Steve's post in the thread 1500 intruder with Like Like.
    You might also need to do a clutch bleed. There will be a bleed nipple at the slave cylinder that need to be bled too. Sometimes the...
  • Aussie Steve replied to the thread 1500 intruder.
    You might also need to do a clutch bleed. There will be a bleed nipple at the slave cylinder that need to be bled too. Sometimes the...
  • Without pulling the tank....if this is the area where the oil came from then it is hard to say what has happened. You need to do some...
  • You My brother is giving me his old 1998 suzuki intruder 1500 he did an oil change and went on a rally ride made it about 30 Miles and...
  • Easy Rider replied to the thread 1500 intruder.
    I think you need a shop visit. Impossible to diagnose without being there. Have you checked and lubricated the shifter...
  • Dewy replied to the thread 1500 intruder.
    Hydraulic, freash oil change in it now!!Shift feels the same running or off
  • Easy Rider replied to the thread 1500 intruder.
    Sounds like your clutch is dragging. Try shifting some with the engine OFF. It that seems to work better, then your clutch definitely...
  • 2003 1500 intruder shifting problems. Give it an oil change and it's good for 1000 to 1500km then starts acting up again. Just won't...
  • The Op never posted back so he presumably fixed the problem if there was one or left never to ride again. I suspect the former.....as...
  • Okay, this tread is old, might not get a reply but what was the issue?
  • RjMaan replied to the thread Long time S83 owner.
    Hi there and welcome on the board
  • Personally, I prefer KTM over others because of its impressive appearance, agility and engine output. I used to ride on ktm85 for...
  • RjMaan replied to the thread Replacing a ybr 125 headlight.
    I think you should contact the seller about the connectivity problem or you can simply plug wires in, hopefully the LED will glow when...
  • Not sure if this went through the 1st time. I think I now have your bike. I noticed a bit of a slip when I goosed it at highway...
Top